Quick model summary
Bosch Dishwasher SHP78CM6N
No model-specific codes verified in this database
Record the exact display message and complete model suffix before using a troubleshooting guide.
This page is for the Bosch SHP78CM6N built-in dishwasher sold in the United States. Bosch US confirms it as a 800 Series Dishwasher 24-inch Black (800 Series). Below are owner-level checks, product-specific features and routes to the correct manual. The source inventory omits the full Bosch E-Nr after the slash, so no revision-matched error-code list or reset sequence has been established.
Bosch 800 Series Dishwasher 24-inch Black SHP78CM6N Error Codes
No manufacturer-confirmed error symbols are currently recorded for this exact model. This does not prove that the appliance cannot display a code or warning.
No verified code list available. Use the matching model manual or manufacturer support for unexplained display messages.
The directory currently provides no verified error-code table for this model. Check the official model manual and symptom advice; do not apply generic codes from another appliance.
Safety first
Avoid electrical panels, hot water, pumps and sharp debris. Switch off power and isolate water only if safe. If water leaks under the machine or a leak-protection warning appears, stop using it, turn off the water supply if safely accessible and contact Bosch. Stop for smoke, damaged wiring or a burning smell.
Quick help
| What you see | Safe next step | When to request service |
|---|---|---|
| Standing water at the end | Do not touch wiring or sharp objects. Bosch’s general drain guidance explains filter checks; use the precise E-Nr manual before removing a pump cover. | If water remains after permitted owner checks, contact Bosch. |
| Water on floor or leak warning | Stop operation. Isolate the water supply if safe and record the exact display; a leak-protection fault needs professional assessment. | Seek service promptly if any leak or E15-type leak alert occurs. |
| Display shows a code | Record the exact letters, numbers and any punctuation. Consult Bosch US general codes as background only. | If a fault remains or interrupts cleaning, use the matching manual and Bosch support. |
Error codes and display messages
No fault-code table has been confirmed from a manual matching Bosch SHP78CM6N with its full E-Nr suffix and United States version. The following examples are linked to Bosch’s general help library and are not confirmed for this exact model. Not verified is not the same as confirmed not applicable; different model revisions can show different fault formats.
General Bosch US dishwasher code references
| Display code | Meaning in Bosch general guidance | Source/model status |
|---|---|---|
E15 | Bosch’s US dishwasher code guide describes water detected in the base / leak protection activated. Shut off water if safe and contact Bosch. | Not confirmed for SHP78CM6N |
E24 | Bosch’s US dishwasher code guide describes a drainage-related problem; Bosch notes possible filter or drain obstructions. | Not confirmed for SHP78CM6N |
E22 | Bosch’s US dishwasher code guide describes a blocked filter in general dishwasher guidance. | Not confirmed for SHP78CM6N |
Never rely on a general code list to select an electrical repair or model-specific reset procedure.
Common problems
Bosch US identifies this as a 800 Series Dishwasher 24-inch Black. The Bosch US listing confirms CrystalDry, PrecisionWash with PowerControl, a flexible third rack and Wi-Fi Home Connect. The listed features are model-identity facts, not proof that a code or reset process applies.
| What you notice | What to check | When to stop |
|---|---|---|
| Dishes are not clean | Refer to Bosch US general maintenance for accessible filter and spray-arm care, and check loading and detergent instructions in the E-Nr manual. | Cleaning remains poor after approved maintenance or there is damage. |
| Water does not drain | Bosch’s drain troubleshooting starts with the filter. Do not reach into the pump or remove a cover without the matching manual; hidden sharp debris is possible. | Standing water remains after safe, manual-approved checks. |
| Dishes stay wet | The official listing identifies CrystalDry for this model. Check loading and the correct documented cycle; avoid assuming another series uses the same drying controls. | Drying remains poor or an electrical/heating fault is indicated. |
| Cycle or status indication is unclear | CrystalDry is a model-confirmed drying feature; do not use unrelated dryer error explanations or attempt its internal repair. Photograph the exact display; match the full E-Nr and refer to the owner’s manual for control behaviour. | A persistent warning, unusual sound, leak or repeated cycle stoppage occurs. |
Manual and support
Use the full E-Nr from the rating label, including the /xx revision, in Bosch’s regional manual finder. The link below opens a manual search, not a verified direct PDF; no manual revision or page was confirmed for the inventory’s unsuffixed model.
- Bosch US official SHP78CM6N product page (manuals section)
- Find manuals by full E-Nr on Bosch US support
- Bosch US support and self-help
- How to find the full appliance model number
Documentation status: Product/feature information is supported by the Bosch regional product page. The exact revision-specific user manual, page references and model-specific code list have not been checked. Do not substitute a family manual without confirming its E-Nr coverage.
Sources and author
- Bosch US product information for SHP78CM6N
- Bosch US manual lookup
- Bosch US general error-code reference
- Bosch US general owner-maintenance guidance
By Ahmad Raza. Last checked: 2026-10-15. No technical reviewer is listed.
Source check only. We did not physically test the appliance; its full Bosch revision suffix and model-specific fault list remain unverified.
Related Bosch Dishwasher models
Compare published guides for other Bosch Dishwasher models. Check the complete model number and market before following instructions.