Bosch SMS26AW08G Freestanding Dishwasher Troubleshooting & Support

Using this guideMatch the full model number and regional manual before following a procedure. Instructions for a related model might differ.

Quick model summary

Appliance model

Bosch Dishwasher SMS26AW08G

Error-code evidence

No model-specific codes verified in this database

First step

Record the exact display message and complete model suffix before using a troubleshooting guide.

Official resources

Manufacturer support

This is the Bosch SMS26AW08G dishwasher troubleshooting and support page for the United Kingdom. Bosch identifies SMS26AW08G as a Series 2 60 cm white freestanding dishwasher for the United Kingdom market. Bosch lists Extra Dry and a Silence programme. The official product page confirms identity and listed features, but it does not prove which general Bosch fault codes are implemented by a particular E-Nr revision. Use the safe checks and matching Bosch documentation below; no exact-E-Nr error-code list or reset sequence was verified for this entry.

Bosch Series 2 60 cm White freestanding dishwasher SMS26AW08G Error Codes

No manufacturer-confirmed error symbols are currently recorded for this exact model. This does not prove that the appliance cannot display a code or warning.

No verified code list available. Use the matching model manual or manufacturer support for unexplained display messages.

The directory currently provides no verified error-code table for this model. Check the official model manual and symptom advice; do not apply generic codes from another appliance.

Safety first

Turn the dishwasher off and isolate electrical power before any owner-permitted cleaning. Never touch wet electrical equipment, expose wiring, open fixed panels, handle live connections or dismantle the pump, heater or controls. Stop using the appliance for leaks, electrical trips, smoke, burning smells or damaged cables. If a leak is suspected, turn off the water supply when safe and arrange qualified help. Bosch UK advises professional repair for heating faults such as those described in its general E09 guidance.

Quick help

Product identification: Series 2 60 cm White. Bosch lists Extra Dry and a Silence programme.

What you seeSafe next stepWhen to request service
Dishwasher does not drainCheck the selected cycle has ended; inspect only accessible areas described by the correct manual. Bosch drainage guidance covers general causes, not proof of this model’s parts layout.Call Bosch if standing water remains, a warning recurs or pump access would require disassembly.
Water at the base or visible leakDo not run another cycle. If safe, turn off the water supply and power; note the visible location without pulling out an installed dishwasher.Arrange service for leakage, wet electrics or water beneath the machine.
Dishes remain dirtyEnsure spray arms have room to turn and the detergent is placed correctly. Bosch discusses filter and spray-arm maintenance in its cleaning guidance.Ask Bosch for help if poor cleaning persists after checks allowed by the matching manual.
An error code or flashing lightRecord the exact characters or light pattern. Copy the full E-Nr including the number after the slash from the door-edge rating label.Request a matching-model interpretation, especially for heating, water leaks or repeated stoppages.

The first checks above are general Bosch owner guidance. They are not evidence that a specific programme, pump location or error code is shared by every SMS26AW08G production suffix.

Error codes and display messages

Evidence limit: Bosch’s regional code pages are general dishwasher advice. No matching document was verified that proves these codes apply to the exact Bosch SMS26AW08G E-Nr suffix. A missing confirmed entry is not proof the appliance cannot display that fault. Do not apply instructions from another variant without checking your manual.

General Bosch dishwasher error references

Bosch uk’s general dishwasher support pages explains the codes below. Treat them only as reference meanings, not model-specific diagnostics.

DisplayMeaning in official general guidanceSource and model status
E09Heating element fault; Bosch UK recommends professional repair.Bosch UK general guidance
Not confirmed for SMS26AW08G
E15Leakage indication; Bosch UK advises checking visible leaks and obtaining support.Bosch UK general guidance
Not confirmed for SMS26AW08G
E18Water supply interrupted or too low, according to Bosch UK.Bosch UK general guidance
Not confirmed for SMS26AW08G
E19Heat-exchanger problem; Bosch UK recommends an engineer.Bosch UK general guidance
Not confirmed for SMS26AW08G
E24Drainage problem associated with a blockage in Bosch UK guidance.Bosch UK general guidance
Not confirmed for SMS26AW08G

If your display shows a different spelling, another number, or a flashing-light pattern, record it exactly rather than assuming equivalent meanings. Check regional Bosch support for your full E-Nr.

Common problems

These are dishwasher-wide checks from Bosch’s United Kingdom support resources, not tested repairs on this particular appliance.

What you noticeWhat to checkWhen to stop
Cycle finishes with dirty dishesBosch’s general cleaning advice covers checking loading, detergent and accessible spray arms. Do not remove hidden components.If a simple accessible check changes nothing, check the exact manual or ask Bosch.
Slow or incomplete drainingBosch’s general drain guidance discusses blockages and hose issues. Follow only cleaning steps present in your precise E-Nr manual.Stop if the pump is inaccessible, the appliance leaks or the fault repeats.
Poor drying or no heatFirst separate droplets on plastic items from a machine that never heats. Bosch support recommends checking loading and rinse aid; heater faults need service.Request service for no heating or an electrical fault; do not open the heating circuit.

Manual and support

Open the dishwasher door and copy the entire rating-plate E-Nr, including any /xx suffix; also retain the FD number if Bosch asks for it. Bosch rating-label guidance. A shared sales model without its production suffix is not enough to verify every manual instruction or fault code.

Manual status: The manufacturer lists manuals under its product and E-Nr support system, but a direct manual matching the complete production suffix and its revision/page was not independently verified. This link opens an E-Nr manual finder, not a direct PDF.

Reset status: No exact-model or full-E-Nr reset sequence was confirmed. Avoid power-button combinations from unrelated Bosch models.

Sources and author

By Ahmad Raza. Last checked: 2026-10-15. No technical reviewer or physical appliance test is claimed.

The Bosch United Kingdom product listing confirms the base model and visible product description. Error-code applicability, exact service steps and manual revision remain unverified for the individual production suffix.

MORE FROM THE SAME BRAND & APPLIANCE

Related Bosch Dishwasher models

Compare published guides for other Bosch Dishwasher models. Check the complete model number and market before following instructions.

Browse matching models