Quick model summary
Bosch Dishwasher SMS6TCI02G
No model-specific codes verified in this database
Record the exact display message and complete model suffix before using a troubleshooting guide.
This page covers the Bosch SMS6TCI02G dishwasher for the United Kingdom market. Bosch UK lists Home Connect, Zeolith and heat-exchanger drying, and AquaStop for this Series 6 model. It provides practical first checks and official manual/support links. The exact model-specific error-code list and button-by-button diagnostic procedures were not confirmed in the documentation reviewed; general manufacturer guidance is clearly labelled below.
Bosch Series 6 60 cm freestanding dishwasher, brushed steel SMS6TCI02G Error Codes
No manufacturer-confirmed error symbols are currently recorded for this exact model. This does not prove that the appliance cannot display a code or warning.
No verified code list available. Use the matching model manual or manufacturer support for unexplained display messages.
The directory currently provides no verified error-code table for this model. Check the official model manual and symptom advice; do not apply generic codes from another appliance.
Safety first
Water and mains electricity are a hazardous combination. Do not remove panels, work on wiring, or open the pump housing without the exact manual. If you see a leak near electrical parts, smell burning, or notice sparks, stop using the dishwasher; isolate power and water only if safe, and arrange service.
Quick help
Product details confirmed on the manufacturer listing: Home Connect, Zeolith / heat-exchanger drying, AquaStop. These features are not themselves evidence that a particular fault code applies.
| What you see | Safe next step | When to request service |
|---|---|---|
| An error or warning | Photograph the display and check the full E-Nr, including the part after the slash. Use the corresponding Bosch UK manual. | If the message recurs or Bosch recommends an engineer. |
| Water does not enter | Confirm the water supply is turned on; inspect only accessible hose bends without disconnecting live electrics. Bosch UK guidance. | If supply appears normal but filling does not resume. |
| Dishes remain dirty or damp | Review loading, accessible filters and rinse-aid guidance in Bosch UK cleaning advice and drying advice. | If the machine fails to heat, leaks, or the problem persists. |
Error codes and display messages
No code or alert was established as applicable to the exact SMS6TCI02G version in the sources reviewed. This does not mean any such code is confirmed impossible. Use the rating label and matching owner manual for an authoritative interpretation.
The following are general Bosch UK dishwasher references, not a code list verified for this exact E-Nr variant.
| Display code | Meaning in general Bosch guidance | Source and exact-model status |
|---|---|---|
E24 | Bosch UK describes a drainage/blockage warning. | Bosch UK general E24 guide Not confirmed for SMS6TCI02G |
E15 | Bosch UK describes leakage or water detected. | Bosch UK general E15 guide Not confirmed for SMS6TCI02G |
E09 | Bosch UK describes a heating-element fault and recommends a technician. | Bosch UK general E09 guide Not confirmed for SMS6TCI02G |
Common problems
The checks below use general official manufacturer guidance, not an exact-variant repair procedure. Verify the complete model and the correct manual before doing anything beyond simple owner-level observations.
Poor washing results
What you notice: Food residue, cloudy items, or an undissolved tablet after a completed wash.
What to check: Bosch UK recommends checking loading, the accessible filter, and spray-arm clearance; follow the matching E-Nr manual before removing any component. Bosch UK cleaning guidance.
When to stop: Stop for leaks, burning smell, or repeated poor results after owner-level checks.
Not filling with water
What you notice: A cycle starts but the tub does not fill as expected.
What to check: Check the accessible supply valve and visible hose routing without detaching fittings. Bosch UK filling guidance.
When to stop: Stop if the hose is damaged, water is leaking, or the fault persists.
Dishes remain wet
What you notice: Visible moisture on dishes at the end of a wash.
What to check: Check loading and rinse-aid advice before assuming a heating fault. Bosch UK drying guidance.
When to stop: Arrange service if heating fails or the manual indicates a heating fault.
Manual and support
Bosch UK lists service documentation by the full E-Nr, which includes characters after a slash (for example, model variants /60, /75 or /86). These are not interchangeable proof of a procedure for every SMS6TCI02G appliance. Copy the complete label before selecting a manual.
- Find the manual using the full Bosch E-Nr
- Bosch UK dishwasher help and repairs
- Bosch UK product page for SMS6TCI02G
Manual verification: The source inventory provides model SMS6TCI02G without the Bosch E-Nr slash suffix. Bosch UK documents variants separately; a matching revision and direct PDF were not verified. This link is the Bosch UK manual finder, not a direct manual.
Sources and author
- Bosch UK SMS6TCI02G product listing
- Bosch UK E-Nr manual finder
- Bosch UK dishwasher support
- Bosch UK cleaning guidance
- Bosch UK water-fill guidance
- Bosch UK drying guidance
- Bosch general E24 reference
- Bosch general E15 reference
- Bosch general E09 reference
By Ahmad Raza. Last checked: 2026-10-15. No technical reviewer or physical appliance testing is claimed.
Verified product identity: https://www.bosch-home.co.uk/en/product/dishwashers/freestanding-dishwashers/freestanding-dishwashers-with-60cm-width/SMS6TCI02G. Model-specific error-code applicability, firmware displays, and any undocumented reset procedure remain unverified.
Related Bosch Dishwasher models
Compare published guides for other Bosch Dishwasher models. Check the complete model number and market before following instructions.