Bosch WQB245AXUC Dryer Troubleshooting & Support

Using this guideMatch the full model number and regional manual before following a procedure. Instructions for a related model might differ.

Quick model summary

Appliance model

Bosch Dryer WQB245AXUC

Error-code evidence

No model-specific codes verified in this database

First step

Record the exact display message and complete model suffix before using a troubleshooting guide.

This troubleshooting page covers the Bosch WQB245AXUC, a 800 Series compact heat pump dryer for the United States market. Bosch confirms the product and key features on its regional listing. A Bosch manual bearing this exact base model number supplies the documented display and maintenance advice below. The source inventory does not specify the two-digit E-Nr slash version, so check that suffix before applying a procedure.

Bosch 800 Series 4.0 cu ft (Bosch US design guide) compact heat pump dryer WQB245AXUC Error Codes

No manufacturer-confirmed error symbols are currently recorded for this exact model. This does not prove that the appliance cannot display a code or warning.

No verified code list available. Use the matching model manual or manufacturer support for unexplained display messages.

The directory currently provides no verified error-code table for this model. Check the official model manual and symptom advice; do not apply generic codes from another appliance.

Safety first

Prevent dryer fires: keep the lint filter clean as the matching manual instructs, do not run the dryer with blocked ventilation or damaged electrics, and keep flammable solvents away. The drum, laundry and water may be hot. Do not open electrical compartments or heat-pump/refrigerant circuits; stop for smoke or a burning smell.

Quick help

What you seeSafe next stepWhen to request service
Unknown display or errorPhotograph the exact characters and note when the message appeared. Compare with this model’s manual and E-Nr suffix.Repeated error, abnormal cycle, leak or hazard.
Clothes stay dampCheck programme/load and clean the lint filter as described in the manual.Poor drying persists or the dryer overheats.
Smoke, burning smell, electrical damage or overheatingStop using the appliance. Do not remove covers or attempt a powered test.Contact qualified service immediately.

Error codes and display messages

No exact-model fault-code list was verified for inclusion in the import. This does not prove that the appliance cannot display a code. Contact Bosch with the displayed characters and the complete E-Nr; codes for a different series or territory are not substitutes.

Documented operating messages, not faults: these are deliberately not entered as error codes.

Display messageWhat Bosch saysEvidence
HotThe dryer is cooling with the drum turning; Bosch describes this as normal rather than a fault.Bosch manual p. 34
Confirmed display message, not an error code.
CArEA reminder to run the basic appliance-care programme following the manual; it is not a claim of component failure.Bosch manual p. 34
Confirmed maintenance reminder, not an error code.

Common problems

Drying is taking too long

What you notice: Drying is taking too long.

What to check: Check the lint filter and accessible air openings. Use the matching manual for any condenser or container care; ventless heat-pump and condensation models have different maintenance steps.

When to stop: Clothing is unexpectedly very hot, the appliance trips the power, or drying remains ineffective after approved maintenance.

Cycle ends with damp clothes

What you notice: Cycle ends with damp clothes.

What to check: Check that the load and chosen programme match the care labels. Review the model's sensor and dryness guidance rather than assuming an internal heater failure.

When to stop: The same programme repeatedly fails after routine documented checks.

Container or lint warning

What you notice: Container or lint warning.

What to check: Read the exact icon or text in the manual; empty the condensation container or clean the lint filter only as directed for this model.

When to stop: Warning persists after proper maintenance, water leaks, or an internal component would have to be opened.

Manual and support

The rating-plate E-Nr can include a slash and a two-digit production-version identifier. This inventory supplies the base model only. Compare the E-Nr, language and market before following a procedure.

Manual evidence: User manual and installation instructions WQB245AXUC, document 9001854211_A, troubleshooting pp. 34–37; E-Nr /xx not supplied.

Sources and author

By Ahmad Raza. Last checked: 15 October 2026. No technical reviewer or hands-on testing is claimed.

Source confidence: Bosch official listing establishes model identity and published features.
Individual model-specific fault codes were not established for import, even where other operating messages are documented.

MORE FROM THE SAME BRAND & APPLIANCE

Related Bosch Dryer models

Compare published guides for other Bosch Dryer models. Check the complete model number and market before following instructions.

Browse matching models